Archive for the ‘Project’ tag

Bamboo Bike Build – Part 2 – Wrapping it Up

with 13 comments

With a bike jig in place and your head tube, bottom bracket, seat-post and dropouts secured in place, the next step is to start measuring out the bamboo and cutting it to size. You can get the metal components from a frame-building supplier like Nova Cycles or harvest them off a junk frame. Once cut each joint needs to be mitered down so that it fits perfectly and snugly around the component you will be epoxying it to. My bamboo was pretty hard, so I ate through a few dremel bits during the mitering process.


Read the rest of this entry »

Written by Cameron Brown

January 12th, 2013 at 12:25 pm

Bamboo Bike Build – Part 1 – Getting Jiggy With It

with 7 comments

I have this thing where when I say that I’m going to do something I inevitably have to do it. No matter how ludicrous or implausible, I’ve just gotta jump in headfirst and hope it works out, somehow it usually does. As it happened, one day in April I realized that I didn’t have a bike… and with no knowledge about how to actually build one I announced that was in fact what I was going to do.

Let’s face it, building a bike out of what is essentially panda-bear food sounds ridiculous. The first question that comes to most peoples minds is “why the heck would you do that?” Bamboo has hundreds of industrial and commercial uses, it’s fascinating stuff, and when it comes to bikes bamboo is actually an excellent frame building material. It’s lighter and stronger than steel/aluminum with better vibration absorbing properties than carbon fiber. I also think that it looks pretty cool. After spending a few weeks researching bamboo tensile strengths, epoxy curing agents, carbon fiber thermal expansion coefficients and a brief refresher on the Pythagorean theory from my tenth grade math textbook I figured I was as ready as I’d ever be to build a two wheeled death trap fit for Gilligan himself.


Read the rest of this entry »

Written by Cameron Brown

January 11th, 2013 at 3:45 pm

Posted in Project

Tagged with , , ,

Retro Tandem Bike / Cruiser Restoration Project

with one comment

Back in February my aunt told me she had on old tandem cruiser sitting in storage getting rusty. Knowing that I like bizarre projects she thought I should come pick it up. So I stripped it down to bare metal, primed, painted, and put it back together. It comes with brand new seats, new handlebars, and a coconut drink coozy.

If you’re interested in picking up a vintage tandem cruiser in fully restored condition, shoot me an email.

 

Read the rest of this entry »

Written by Cameron Brown

July 10th, 2012 at 9:53 am

Posted in Project

Tagged with , , , , , , ,

Junkyard Beer Fridge Project

with 2 comments

I recently found an old rusty vintage refrigerator at the dump heading for the scrap pile. I scoped it out, and figured it still looked like it might work, plus I needed a new fridge for my home-brew. So I took it home, plugged it in and it clicked on immediately… so I got to work. After a few hours of sanding, painting, drilling and re-insulating… here is the result:

Read the rest of this entry »

Written by Cameron Brown

March 10th, 2011 at 8:30 am

Posted in Design,Project

Tagged with